BT REFLEX RR B Service Manual page 396

37- 12
Lifting devices – 7400
Maintenance
T-code
403-414, 669-671, 716-718
Date
2005-06-01
37.5.1 Maintenance
• Lubricate the top side of the inner fork as required. Lubricate using
calcium grease (e.g. Q8 Ruvsdael WR2). (1)
• Check the wear on the forks' underside and wear plate, particularly
on the back. Check inner fork according to ISO 5057, except for
"Fork arm blade and shank" because the inner fork must not be ex-
posed to wear. (Chapter 1.1). (5)
• Check for hydraulic leaks/damage. Examine the cylinder head for
leakage. (This is easy to see if you remove the outer fork)
• If there is any leakage at the heel of the telescopic forks, they must
be removed immediately. If the couplings are leaking, they should
be tightened or replaced. (2)
• When the wear plate on the underside of the forks is completely
worn down or the outer fork sleeves begin to wear, the wear plate
should be replaced with a new one to prevent damage to the outer
fork sleeves and inner fork.
• Once the outer fork is removed, you can easily check the cylinder
head. (4)
Service Manual REFLEX RR B,E RR B,E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
4
4
2
5
2
1
4
© BT Europe AB