BT REFLEX RR B Service Manual page 93

© BT Europe AB
Driver protection – 0840
Tilt Stops
Valid from serial number
713962-
Order number
218920-040
9.2.2 Removing the tilt stops
Some tilt stops can be removed. Carefully follow the observations in the
table below.
The table relates to 900 mm support arm width. Trucks with a greater
support arm width normally have no tilt stops.
Truck Lift height
RR B/E 1-2
RR B/E3 -max lift height
RR B/E4 -max lift height
RR B/E5-6 -7,000 mm
Over 7,000 mm
RR B/E7 -7,000 mm
Over 7,000 mm
RR B/E8 -8,000 mm
Over 8,000 mm
Service Manual
https://www.forkliftpdfmanuals.com/
Comments
Not equipped with tilt stops
The tilt stops must not be removed
The tilt stops must not be removed
The tilt stops can be removed
The tilt stops must not be removed
The tilt stops can be removed
The tilt stops must not be removed
The tilt stops can be removed
The tilt stops must not be removed
REFLEX RR B,E RR B,E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
9- 3