BT REFLEX RR B Service Manual page 311

© BT Europe AB
Keypad
General
Valid from serial number
713962-
Order number
218920-040
25- Keypad
25.1 General
This chapter is about the keypad on which you can designate and
change the PIN-codes along with starting the truck.
In the memory of the keypad there are 10 blocks with 10 different driver
PIN-codes which are stored as a standard. The 10 different driver PIN-
codes has different driver profiles. All 100 driver PIN-codes can be
reprogrammed and changed in the driver profiles.
The driver PIN-codes in the keypad or the TLS can be used for log-in
depending how the kaypad is programmed.
25.2 Display
The picture to the left indicates the front of the keypad and the picture to
the right indicates the back. The table describes the terminalnumber
and function of the contact.
Connection
X3:1
X3:2
X3:3
X3:4
X3:5
X3:6
X3:7
X3:8
X3:9
The relay can be charged with maximum 10A resistive.
Service Manual
https://www.forkliftpdfmanuals.com/
Function
Relay in
Battery +
CAN L
CAN H
Coding PIN 1
Relay out
Battery -
Not used
Coding PIN 2
REFLEX RR B/E, RR B/E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
1 5
6 9
X3
Active (V)
48
48
0-5
0-5
0
48
0
0
25- 99