BT REFLEX RR B Service Manual page 391

© BT Europe AB
Lifting devices – 7400
Telescopic forks
Valid from serial number
713962-
Order number
218920-040
37.4 Telescopic forks
37.4.1 Telescopic forks
The KOOI forks, manufactured by Meijer Special Equipment Company
in Holland
(BT has the right to use original text from Meijer Special Equipment in the
Netherlands, which is the manufacturer of KOOI Reachforks.)
designed fork with a thickness of 56 mm. This flatter fork can be used
for load bearers with lower tunnel heights. The telescopic forks are fit-
ted just like conventional lifting truck forks and can be moved on the
carriage in the same way. Each fork has an identification plate on the
top. The plates contain important information about the technical spec-
ifications of the fork, for example, the maximum load capacity per fork.
Operation of the telescopic forks is by means of a closed and self-lubri-
cating oil circuit. The telescopic forks are delivered with oil that com-
plies with cleanliness standard ISO 4406 17/12.
The telescopic forks should be re-tested every year according to the
ISO 5057 requirement (See chapter 1.1). The international standard
has to be applied for checking the forks except for the chapters regard-
ing "Fork arm blade and shank" because the inner fork must not be
exposed to wear
An L or R is added to the identification plates of the telescopic forks .
The forks are mounted on the fork carrier corresponding to left and right
as viewed from the driver's seat. The forks slide onto the fork carrier so
that the locking catch fits into the carrier recess.
The flow divider is mounted on the back of the fork carrier.
The flow divider is mounted in a horizontal position.
The hydraulic hoses included for the telescopic forks and the hoses for
the forklift truck are connected according to the figure.
Every fitting must be carefully tightened and secured.
The maximum fluid pressure of the telescopic forks is 200 bar.
Service Manual
https://www.forkliftpdfmanuals.com/
REFLEX RR B,E RR B,E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
, are a specially-
37- 7