BT REFLEX RR B Service Manual page 346

31- 4
Free lift cylinder – 6620
Dismantling the piston
T-code
403-414, 669-671, 716-718
Date
2005-06-01
31.5 Dismantling the piston
• Remove the rod seal (5) and support ring (4).
• Knock and heat the piston a little (3), if necessary.
• Unscrew the piston (3) using pipe wrench 08-15393.
• Brush off any old flange sealant.
31.5.1 Fitting the piston in the free lift
cylinder
• Apply OMNI 230 on the thread.
• Screw in the piston (3) using assembly tool 08-15390.
• Take care to wipe off all surplus sealant.
31.6 Dismantling and assembling the
hose rupture valve
• Dismantle the lowering brake valve (7) using tool 08-15417
• Assemble the lowering brake valve (7) using tool 08-15417
Service Manual REFLEX RR B,E RR B,E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
© BT Europe AB