BT REFLEX RR B Service Manual page 388

37- 4
Lifting devices – 7400
Checking the fork carriage's wearing strips
T-code
403-414, 669-671, 716-718
Date
2005-06-01
37.2 Checking the fork carriage's
wearing strips
The wearing strip (A) between the yoke and ball beam on the fork car-
riage is exposed to wear and must be checked every year. Measure the
space (B) between the yoke and the ball beam.
When the wearing strip is new, the space is 2 mm.
If the space is 4 mm or more, the wearing strip must be replaced.
Check the space (C) between the stop lug and the fork yoke on the fork
carriage as well.
Max. tilt angle up to 1 mm.
The space can be adjusted using the screws on the stop lug.
Service Manual REFLEX RR B,E RR B,E CC
https://www.forkliftpdfmanuals.com/
Valid from serial number
713962-
Order number
218920-040
A
B
C
© BT Europe AB