BT REFLEX RR B Service Manual page 195

© BT Europe AB
Electrical system – 5000
Functional description
Valid from serial number
713962-
Order number
218920-040
21.4.3 Choice of travel direction
The travel direction can be selected in three ways.
On the control console
When the S26 control is pressed down, voltage is fed from the switch to
A5. If the control is held down for at least three seconds, the truck runs
at crawl speed.
Designation
DRIVE, FORK DIRECTION
DRIVE, STEER WHEEL
DIRECTION
On the left-hand handle
When control S28 is pressed, voltage is fed from the switch to A5, caus-
ing the truck to change direction of travel. This control can only be used
to change direction of travel after the choice has been made on the
steering wheel console. It does not allow the crawl speed function to be
selected either.
Designation
DRIVE,
CHANGE DIRECTION
On the accelerator
When the pedal is pressed down on the right-hand side (fork direction)
voltage is fed from switch S27 to A5. To switch the truck's travel direc-
tion, press down on the left-hand side. The pedal does not allow the
crawl speed function to be selected.
Designation
DRIVE, FORK DIRECTION
DRIVE, STEER WHEEL
DIRECTION
The display shows the direction of travel.
Service Manual
https://www.forkliftpdfmanuals.com/
Diode number
104
105
Diode number
111
Diode number
106
107
REFLEX RR B,E RR B,E CC
T-code
403-414, 669-671, 716-718
Date
2005-06-01
21- 37