Connecting The Phone; To Attach The Handset; Leg Stoppers - NEC DT820 Series User Manual

Figure 3.4
3
Figure 3.5
To a t tac h the hand set
1
2
DT820 Phone User Guide

Leg stoppers

Adjust the tilt leg and return the phone to the upright position.
Adjust tilt leg (Low)
C O N N E C T I N G T H E P H O N E
Insert the coiled cord plug into the HANDSET connector on the back of the phone, until
you hear a click.
Thread the coiled cord through the groove, as shown in the figure below.
I N S TA L L AT I O N
3 -29