Installation Procedure; Attaching Handset; Connecting The Line Cord - NEC DT930 Series User Manual

(11) Answer Key
When LED on this key is lit, press this key to
answer a waiting call.
(12) Feature Key
To activate features such as terminal setup, and
to program One-Touch Speed Dial Keys.
(13) Recall Key
To finish a call and hear the dial tone.
(14) Programmable Keys
These keys can be programmed as Flexible line
key/Programmable feature key by System
Administrator.
(15) Home Key
Classic Mode: To display explanations of the
softkeys on the LCD.
Portal Mode: Returns to the Home screen
(Favorite or Call screen) specified in the system/
terminal menu settings.
If a Home URL has been set. press this button to
return to the Home URL.
In Classic mode, not all contents are
displayed. Contact the System Administrator
for details.
(16) Softkeys
Any feature shown at the bottom of the LCD is
available. The appropriate feature key is
displayed on the screen according to the call
handling process.
(17) LCD
4.3 inch color display with backlight.

Installation Procedure

The images used in the section are for illustrative
purposes. Some of the images might not be
images of DT930 telephones.

Attaching Handset

(1) Install the modular plug (attached to the curl cord
of the handset) into the handset connector at the
back of terminal. Push until it snaps into place.
(2) Lead the Handset cable through the applicable
groove.

Connecting the Line Cord

Line Cord Connection DT930
(1) Install the modular plug of the line cord into the
Line Connector at the back of terminal. Push until
it snaps into place.
6