Table of Contents
Advertisement
BASIC OPERATION
Making a Call using the Handset
1.
Pick up the handset and wait for dial tone.
2.
Dial the desired number.
3.
Replace the handset when you finish the call.
Or, to preview the dialed number:
1.
Dial the desired number with handset on-hook.
2.
You may press the DELETE key to erase dialed digits one at a time.
3.
When you have finished dialing, lift the handset.
4.
Replace the handset when you have finished the call.
NOTE
Adjust the volume if needed using the Handset Volume Control Switch.
Making a Call using Speakerphone
By using the SPEAKER key, you can make and receive calls without lifting up the handset. The
speakerphone works in similar way to a two-way radio; both parties cannot talk at the same time.
1.
Press the SPEAKER key and wait for dial tone.
2.
Dial the desired number.
3.
Once answered, converse normally. Be sure to speak clearly toward the microphone
(located under the front edge of the phone).
4.
To end the call, press the SPEAKER key.
Or, to preview the dialed number:
1.
Dial the desired number with handset on-hook.
2.
You may press the DELETE key to erase dialed digits one at a time.
3.
When you have finished dialing, press the SPEAKER key.
4.
Once answered, converse normally. Be sure to speak clearly toward the microphone
(located under the front edge of the phone).
5.
To end the call, press the SPEAKER key.
NOTE
Adjust the speaker volume if needed by pressing the VOLUME key.
Receiving a Call using the Handset
1.
Lift the handset when the phone rings.
2.
Converse with your caller.
3.
Replace the handset when you finish the call.
NOTE
Adjust the volume if needed using the Handset Volume Control Switch.
9
BASIC OPERATION
Advertisement
Table of Contents
