Figure 11-65 Grooved Cutout For Serial Cable; Figure 11-66 Insert Stopper For Handset Use - NEC Univerge SV8100 System Hardware Manual

Issue 1.0
11 - 84
10. Gently press the serial cable into the grooved cutout for the
cable.

Figure 11-65 Grooved Cutout for Serial Cable

11. Connect the serial connection cord (refer to
Attach PSA-L Unit to the Multiline Terminal on page
from the PSA-L UNIT to the terminal body.
12. Open the Dip Switch Cover (refer to
Connections on page
adapter to the required position. Close the cover.
13. If using the handset, place the stopper in the tilt leg.

Figure 11-66 Insert Stopper for Handset Use

UNIVERGE SV8100/SV8300
Cable Groove
Figure 11-60 PSA-L UNIT
11-81). Set the dip switch on the PSA-L
Installing SV8100/SV8300 Optional Equipment
Figure 11-64
11-83)