2- Install The Voipdb Card (Optional); Removing The Plastic Knockouts - NEC SL2100 Quick Install Manual

Install the CPU Card

2- Install the VOIPDB card (Optional)

The VOIPDB card is optional and is only required when more than the 8 VOIP resources built into the CPU card
are required.
Remove the plastic knockout from the front panel of the CPU card.
Install the VOIPDB card to connector J2 on the CPU card and tighten the 4 screws

Removing the Plastic Knockouts

Card knockouts
Use small cutters with a flush cutting jaw, ensure the flush side of the cutter is towards the front panel of the
card.
Cut the three connection points for the knockout
Remove any sharp edges with a utility knife
Quick Install Guide – SL2100 SLNet rev1.0
Ensure the flush side of the
cutter is towards the front
panel of the card
11