Voice Announce Unit (Vrs) - NEC Aspire Feature Handbook

Voice Response System (VRS)
This feature requires the Voice Response System (VRS) provided
by the DSP daughter board (DSPDB).
You can record the Voice Response System (VRS) messages your sys-
tem uses for Automated Attendant greetings (page 16) and the General
Message (page 51). If your system has incoming 900 service, you can
also record the message that plays to those callers before automatic
billing occurs. You can record up to 48 messages.
To record, listen to or 1.
erase a VRS Message:
2. To record, dial
3. Dial the VRS message number (01-48)
4.
All manuals and user guides at all-guides.com
+ .
.
OR
To listen, dial .
OR
To erase, dial .
you want to record, listen to or erase.
If recording, begin when you hear the
announcement, "Please start recording."
When done, press # to end recording.
When listening to a message, press #
to hear the message again.
If erasing, you can cancel erasing by
pressing HOLD before hanging up.
to hang up.
129