UNIVERGE SV8100/SV8300
11.4
System Hardware Manual
Password
Locks access to these settings and those at the user level.
When making changes, the application must be closed and started
again to become effective.
Figure 11-34 Voice Security Recorder Connection
Operation Note
Use the Options and File Management tabs within the D
Recorder application to adjust the program settings as required (directory for
storing messages, message deletion, file format, etc.).
It is recommended that after the initial installation of the D
Recorder application, that the audio balance of the remote side be changed to
approximately 100%.
term
1.
Open the D
Voice Security Recorder application.
2.
Click the Options tab.
3.
Using the up arrow button, change the Remote Boost (%) setting to
100%.
Excessive boost can distort audio.
Issue 1.0
term ®
Voice Security
term
Voice Security
11 - 45