Wall Mounting - NEC DT830 Series User Manual

• TO INSTALL KEY SET UNIT (LINE KEY
PANEL, BUTTON PANEL, AND LINE KEY
CARD)
STEP 1: Align the holes in the line key card with the
buttons on the telephone.
STEP 2: Align the holes in the line key panel with the
buttons on the telephone and then push the
four corners of the panel until the panel clicks
into place.
Line Key Panel
Note: Be sure to install the line key panel correctly, or it
may cause undesired operation of the terminal.

WALL MOUNTING

A wall mount unit (WM-L UNIT) is used to mount all
telephones to the wall. This unit connects to the back
side of the telephone.
WARNING
To mount the telephone set on the wall, the following
space is required.
Line Key Card
Space for
Modular terminal
30
DT830 DT430/410
Be careful not to drop the telephone set while
mounting it on the wall. It can cause injury.
Make sure the telephone set is firmly mounted
on the wall to prevent the telephone set from
falling out. It can cause injury.
117.5
136
30 (approximately)
60
83.5
60
25 (approximately)
Tab Slots
15 (approximately)
35 (approximately)
All dimensions in mm
Telephone
(In the case of 12D/24D)