Connecting The Charger; Figure 8-34 Install The Mounting Screws; Figure 8-35 Connecting The Charger - NEC Univerge SV8100 System Hardware Manual

UNIVERGE SV8100/SV8300
5.6
System Hardware Manual
Make sure the wall material is capable of supporting the weight of the base
and handset.
Use #10 screws (minimum length of 1 & 3/8 inches) with anchoring devices
suitable for the wall material where the base unit will be placed.
1. Insert two mounting screws into the wall (with their appropriate
anchoring device), 3 & 15/16 inches apart. Allow about 1/8 of an inch
between the wall and screw heads for mounting the telephone.
2. Refer to 5.4 Mount the Base Unit on a Standard Wall Plate
through 7 above for mounting the telephone.

Connecting the Charger

1. Connect the AC adapter to the DC IN 9V jack and to a standard 120V
AC wall outlet.

Figure 8-34 Install the Mounting Screws

Figure 8-35 Connecting the Charger

Issue 1.0
steps 1
8 - 29