S
4-19
ECTION
WALL-MOUNT BRACKET
4.19.1
Using the Wall-Mount Bracket
Each UX5000 terminal/console provides the ability to wall-mount the equipment using a standard wall-mount
plate. This allows the terminal to be mounted to a wall at a convenient location.
Terminals with an ADA or APR adapter installed must use a wall-mount adapter (P/N 680610).
4.19.2
Installing the Keyset Wall-Mount Bracket (Figure 4-37 - Figure 4-39)
1.
Flatten the legs on the equipment (terminal/console) to be wall-mounted.
2.
Connect the line cord cable from the terminal to the jack in the wall-mount plate.
3.
Position the equipment to be wall-mounted over the 2 support screws on the wall-mount plate.
4.
Gently slide the equipment down over the support screws, ensuring that both the top and bottom screws
are covered.
●
The equipment should snap into place. Make sure the equipment is securely attached.
Chapter 4
Figure 4-37:
ATTACHING TO THE WALL-MOUNT PLATE
Chapter 4 - Terminals and Optional Equipment
4 - 73