Wall Mounting the KSU
Before wall mounting the KSU, it is recommended that the wall mounting screws be
attached to the piece of plywood (13 mm thick or more) or attached to a sturdy wall.
1.
2.
Installation Manual, Chapter 2 – KSU Installation
November 2003, A6-506000-642-01(8508), Release 6.0
Using two of the four screws (provided with the KSU) attach the wall mount
template to the wall. (Refer to Figure 2-3: Attaching the Wall Mounting Bracket for
the KSU to the Wall, Pg 47.)
Figure 2-3: Attaching the Wall Mounting Bracket for the KSU to the Wall
While holding the KSU, hang the upper two openings that are located in the KSU
base over the wall mount template. (Refer to Figure 2-4: Attaching the KSU to the
Wall Mount Template, Pg 47.)
Figure 2-4: Attaching the KSU to the Wall Mount Template
47