Developing Assembly; Outline - Canon GP335 Service Manual

CHAPTER 6 IMAGE FORMATION SYSTEM
II. DEVELOPING ASSEMBLY
A. Outline
The developing assembly consists of the developing cylinder, toner sensor (TS1), and toner
stirring rod. The developing assembly is locked in position manually by operting the locking lever
together with the developing assembly rail.
The developing cylinder and the toner rod are rotated by the drive of the main motor (M1).
Developing bias control signal
Motor drive signal (MID)
J102
Toner detection signal (TSIS)
J108
6-16
Developing bias
Photosensitive
drum
Main motor
Figure 6-200
COPYRIGHT © 1999 CANON INC. CANON 405/335 REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Toner stirring rods
Developing
cylinder
CL4
M1
Developing assembly clutch
Toner sensor (TS1)