CHAPTER 6 FIXING SYSTEM
B. Delivery Assembly
1. Removing the Upper Separation
Claw
1) Remove the fixing assembly. (See p. 6-8.)
2) Remove the stepped screw [1], and detach
the bend [A]); then, detach the upper
delivery assembly [2].
3) Remove the two stepped screws [3], and
slide the upper separation claw assembly
[4] in the direction of the arrow to
remove.
4) Detach the spring [5], and detach the
upper separation claw [6].
2. Removing the Lower Separation
Claw
1) Remove the delivery roller. (See p. 6-17.)
2) Remove the two stepped screws [1], and
free the harness; then, detach the lower
separation claw assembly [2].
6–16
COPYRIGHT © 1998 CANON INC.
[2]
[1]
[3]
CANON NP7161/NP7160 REV.0 AUG. 1998 PRINTED IN JAPAN (IMPRIME AU JAPON)
[A]
Figure 6-227
[4]
Figure 6-228
[5]
Figure 6-229
[2]
[1]
[1]
Figure 6-230
[3]
[6]