Removing The Cassette Separation Roller Unit - Canon imageCLASS LBP325dn Service Manual

NOTE:
Procedure for Installing the Cassette Pickup Unit
1. While pressing the lever, fit the boss into the groove on the lever.
2. Fit the hole of the Cassette Pickup Unit onto the shaft on the left side, and push it until it stops.
3. Fit the hole of the Cassette Pickup Unit onto the shaft on the right side to install the Cassette Pickup Roller Unit.
CAUTION:
After installation, push the lever to check that it is interlocked with the Cassette Pickup Unit. If not, remove and install the
Cassette Pickup Unit again.

Removing the Cassette Separation Roller Unit

■ Preparation
1. Remove the cassette.
5. Parts Replacement and Cleaning
167