Removing The Lower Separation Claw Assembly; Removing The Lower Roller - Canon NP6260 Service Manual

12. Removing the Lower Separation
Claw Assembly
1) Slide out the fixing unit from the
copier.
2) Remove the fixing/feeding assembly
front cover.
3) Remove the brake unit.
4) Remove the fixing assembly upper
cover.
5) Remove the fixing cleaning belt,
clean the silicone oil pan; then,
remove the fixing assembly upper
unit.
6) Remove the two mounting screws
, and remove the lower separation
claw assembly 2 together with its
support plate
7) Remove the tension spring, and
remove the lower separation claw
assembly.

13. Removing the Lower Roller

1) Slide out the fixing/feeding unit from
the copier.
2) Remove the fixing/feeding assembly
front cover.
3) Remove the flywheel.
4) Remove the fixing assembly upper
cover and the fixing cleaning belt;
then, remove the silicone oil pan.
5) Remove the upper roller assembly
of the fixing assembly.
6) Remove the lower separation claw
support plate.
7) Remove the lower roller
fixing assembly, remove the two E-
rings from the lower roller, and
remove the two bearings
COPYRIGHT © 1997 CANON INC.
.
from the
.
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 FIXING SYSTEM
Figure 6-225
Figure 6-226
6-29