Show Ip Dhcp Global Configuration; Show Ip Dhcp Pool Configuration - D-Link DWL-8500AP Command Reference Manual

IP address
Hardware Address The MAC Address or the client identifier.
Lease expiration The lease expiration time of the IP address assigned to the client.
Type

show ip dhcp global configuration

This command displays address bindings for the specific IP address on the DHCP server. If no
IP address is specified, the bindings corresponding to all the addresses are displayed.
Format
Modes
Service DHCP The field to display the status of dhcp protocol.
Number of Ping Packets The maximum number of Ping Packets that will be sent to verify
Conflict Logging Shows whether conflict logging is enabled or disabled.
BootP Automatic Shows whether BootP for dynamic pools is enabled or disabled.

show ip dhcp pool configuration

This command displays pool configuration. If
is displayed.
Format
Modes
Pool Name
Pool Type
Lease Time
DNS Servers
Default Routers The list of the default routers available to the DHCP client
The following additional field is displayed for Dynamic pool type:
Network
The following additional fields are displayed for Manual pool type:
Client Name
Client Identifier The unique identifier of a DHCP client.
Hardware Address The hardware address of a DHCP client.
Hardware Address Type The protocol of the hardware platform.
Host
The IP address of the client.
The manner in which IP address was assigned to the client.
show ip dhcp global configuration
Privileged EXEC
User EXEC
that an ip address id not already assigned.
show ip dhcp pool configuration {<name> | all}
Privileged EXEC
User EXEC
The name of the configured pool.
The pool type.
The lease expiration time of the IP address assigned to the client.
The list of DNS servers available to the DHCP client
The network number and the mask for the DHCP address pool.
The name of a DHCP client.
The IP address and the mask for a manual binding to a DHCP client.
is specified, configuration for all the pools
all
DHCP Server Commands
6 Utility Commands
289