Configuring User Accounts - Huawei Quidway S1700 Series Web User Manual

Quidway S1700 Series Ethernet Switches
Web User Manual
Figure 9-2 Configuring Remote Authentication Server
Table 9-2 Parameters of Configuring Remote Authentication Server
Title
Server
Address
Authentication
Server UDP Port
Authentication
Retries
Set Key
Authentication
Key
Confirm
Authentication
Key
----End

9.2 Configuring User Accounts

Use the Security > User Accounts page to control management access to the switch based on
manually configured user names and passwords.
Issue 01 (2011-11-17)
Description
IP Address of authentication server.
(A Server Index entry must be selected to display this item.)
Network (UDP) port on authentication server used for authentication
messages. (Range: 1-65535)
Number of times the switch tries to authenticate logon access via the
authentication server. (Range: 1-3)
Mark this box to set or modify the encryption key.
Encryption key used to authenticate logon access for client. Do not use
blank spaces in the string. (Maximum length: 48 characters)
Re-type the string entered in the previous field to ensure no errors were
made. The switch will not change the encryption key if these two fields
do not match.
The default administrator name is "admin" with the password "admin."
The normal user only has read access for most configuration parameters. However, the
administrator has write access for all parameters governing the onboard agent. You
should therefore assign a new administrator password as soon as possible, and store it in
a safe place.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
9 Security Measures
77