Maintenance Supplies And Tools - Thermo Scientific TSQ 8000 Evo Hardware Manual

Maintenance Supplies and Tools

Thermo Scientific
To perform routine maintenance on the TSQ 8000 Evo instrument, you will need the
supplies and tools listed in the following table. The supplies in the MS Toolkit are included in
the toolkit shipped with your instrument.
Item
Cloth or paper, lint-free
Column measuring tool
Source exchange tool
Forceps
Gas, clean and dry
Gloves, clean, lint-free
Protective eye wear
Torx® T10 screwdriver
Torx® T20 screwdriver
Torx® T30 screwdriver
Wrenches, open-ended, 1/4-in., 5/16-in., 3/8 in.,
7/16-in.
Note The tools in the MS Toolkit are shipped in a black plastic case with the instrument.
Each tool in the kit can be ordered separately or you can order an additional toolkit. See
the TSQ 8000 Evo Spare Parts Manual for ordering information.
IMPORTANT Many nitrile and latex gloves not certified for clean room use contain
silicone mold releasing agents that will contaminate the instrument. For this reason, clean
room gloves are strongly recommended. We recommend Cardinal Health CP100 Nitrile
Cleanroom Gloves. See the TSQ 8000 Evo Spare Parts Guide for ordering information
In addition to the MS Toolkit, you can also purchase a TSQ 8000 Evo Screw Kit, which
includes extra screws, nuts, and standoffs. Refer to the TSQ 8000 Evo Spare Parts Manual for
ordering information.
1
Performing Routine Maintenance
Maintenance Supplies and Tools
Included in the Not Included in
MS Toolkit the MS Toolkit
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
TSQ 8000 Evo Hardware Manual 3