Install Feature-Set Mpls - Cisco Nexus 7000 Series Command Reference Manual

install feature-set mpls

install feature-set mpls
To install feature set Multiprotocol Label Switching (MPLS), use the install feature-set mpls command.
To restore the system to its default condition, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults Only in default VDC
Command Modes Global Configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to install feature set MPLS:
switch# configure terminal
switch(config)# install feature-set mpls
feature set is installed already(0x40aa0011)
switch(config)#
Related Commands Command
feature-set mpls
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
184
install feature-set mpls
no install feature-set mpls
Modification
This command was introduced.
Description
Enables the feature set Multiprotocol Label Switching (MPLS).
I Commands
OL-24994-01