Cisco Nexus 7000 Series Command Reference Manual page 388
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
show mpls traffic-eng autoroute
show mpls traffic-eng autoroute
To display the autorouted tunnel destination information, use the show mpls traffic-eng autoroute
command.
Syntax Description
ipaddr
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
This example shows how to display the autorouted tunnel destination information:
Examples
switch# show mpls traffic-eng autoroute 10.1.1.2
MPLS TE autorouting enabled
destination 0001.0001.0002.00, area isis-p1 level-2, has 1 tunnels
Related Commands
Command
show mpls traffic-eng
forwarding-adjacency
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1310
show mpls traffic-eng autoroute [ipaddr]
(Optional) Destination IP address for the autorouted tunnels.
Modification
This command was introduced.
tunnel-te3000 (nexthop 10.1.1.2)
(flags: Announce)
Description
Displays the forwarding adjacency tunnel destination information.
Show Commands
OL-24994-01
Advertisement
Table of Contents
