Cisco Nexus 7000 Series Command Reference Manual page 209

M Commands
mpls traffic-eng area
To turn on the Multiprotocol Label Switching (MPLS) traffic engineering (TE) for the indicated Open
Shortest Path First (OSPF) area, use the mpls traffic-eng area command. To return to the default setting,
use the no form of this command.
Syntax Description
area-id
Defaults
None
Command Modes Router configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to turn on MPLS TE for the indicated OSPF area:
switch(config)# router ospf 100
switch(config-router)# mpls traffic-eng area 1
switch(config-router)#
Related Commands Command
interface tunnel-te
OL-24994-01
mpls traffic-eng area area-id
no mpls traffic-eng area area-id
Area ID that can be a IP address or a positive integer.
Modification
This command was introduced.
Description
Configures the traffic engineering (TE) interface.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls traffic-eng area
1161