Cisco Nexus 7000 Series Command Reference Manual page 251

R Commands
redundancy
To configure a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI) context as the primary or
secondary node, use the redundancy command.
Syntax Description primary
secondary
Defaults None
Command Modes config-l2vpn-vfi mode
Supported User Roles network-admin
vdc-admin
Command History Release
6.2.2
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure an L2VPN VFI context as the primary node:
switch# configure terminal
switch(config)# l2vpn vfi context vpls80
switch(config-l2vpn-vfi)# description VFIforDualHome
switch(config-l2vpn-vfi)# vpn 10
switch(config-l2vpn-vfi)# redundancy primary
switch(config-l2vpn-vfi)#
Related Commands Command
bridge domain
l2vpn vfi context
vpn
OL-24994-01
redundancy {primary | secondary}
Specifies the context as a primary node.
Specifies the context as a secondary node.
Modification
This command was introduced.
Description
Enters bridge-domain configuration mode and configures a bridge domain.
Establishes a Layer 2 VPN (L2VPN) Virtual Forwarding Interface (VFI)
between two or more separate networks.
Configures a Virtual Private Network (VPN) ID on a VFI context.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
redundancy
1203