Cisco Nexus 7000 Series Command Reference Manual page 378

show mpls switching aggregate vrf
show mpls switching aggregate vrf
To display the per virtual routing and forwarding (VRF) aggregate-related information, use the show
mpls switching aggregate vrf command.
Syntax Description vrf
vrf name
Defaults None
Command Modes EXEC
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display the per-VRF aggregate-related information:
switch# show mpls switching aggregate vrf vrf1
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1300
show mpls switching aggregate ipv6 {vrf vrf name}
Displays the virtual routing and forwarding (VRF) instance.
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01