Cisco Nexus 7000 Series Command Reference Manual page 355

Show Commands
show mpls ip bindings
To display the Multiprotocol Label Switching (MPLS) IP Label Information Base, use the show mpls
ldp bindings command.
Syntax Description destination-prefix
advertisement-prefix-list
detail
local
local-label
number
neighbor
addr
remote-label
summary
Defaults None
Command Modes EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the LDP summary information:
switch# show mpls ip bindings summary
Total number of prefixes: 2
Total tib route info allocated: 1
switch#
OL-24994-01
show mpls ip bindings destination-prefix [advertisement-prefix-list | detail | local | local-label
[number] | neighbor addr | remote-label [number] | summary]
Modification
This command was introduced.
Destination prefix.
(Optional) Displays the advertisement prefix list.
(Optional) Displays the detailed information.
(Optional) Displays only locally assigned label values.
(Optional) Displays the locally assigned label values.
(Optional) Displays the label value. The range is from 1 to 2147483647.
Displays the label from LDP neighbor.
Neighbor IP address.
(Optional) Displays remotely assigned label values.
(Optional) Displays the summary information.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls ip bindings
1277