Feature Mpls Ldp - Cisco Nexus 7000 Series Command Reference Manual
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
F Commands
feature mpls ldp
To enable the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) feature on the
device, use the feature mpls ldp command. To return to the default setting, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Defaults
Per VDC
Command Modes
Global configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
When you disable MPLS LDP on the device, no LDP commands are available.
This command requires the MPLS Services license.
Examples
This example shows how to enable IP over MPLS:
switch(config)# install feature-set mpls
switch(config)# feature-set mpls
switch(config)# feature mpls ldp
LAN_ENTERPRISE_SERVICES_PKG license not installed. ldp feature will be shut down
after grace period of approximately 115 day(s).
switch(config)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
feature mpls ldp
no feature mpls ldp
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
feature mpls ldp
159
Advertisement
Table of Contents
