Cisco Nexus 7000 Series Command Reference Manual page 43

Hide thumbs Also See for Nexus 7000 Series:

Table of Contents

The bandwidth command configures the initial tunnel bandwidth, which is adjusted by the auto

bandwidth mechanism.

This command requires the MPLS Services license.

This example shows how to configure the automatic bandwidth configuration:

switch# configure terminal

switch(config)# mpls traffic-eng configuration

switch(config-te)# lsp attributes 1

switch(config-lsp-attr)# auto-bw

Related Commands

interface tunnel-te

If no setting is specified for an LSP, then the LSP/path option inherits any setting specified in the

tunnel-te configuration mode such as affinity, auto-bw, priority, record-route,

protection/fast-reroute.

Configures the traffic engineering (TE) interface.

auto-bw (LSP attribute configuration mode)

Cisco Nexus 7000 Series NX-OS MPLS Command Reference