Cisco Nexus 7000 Series Command Reference Manual page 384

show mpls switching traffic-eng lsp ipv4
show mpls switching traffic-eng lsp ipv4
To display the traffic engineering label switched path (LSP) IPv4-related entries, use the show mpls
switching traffic-eng lsp ipv4 command.
Syntax Description TE ingress address
detail
vrf
vrf name
Defaults None
Command Modes
EXEC
Supported User Roles
network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples
This example shows how to display the traffic engineering LSP IPV4 per VRF related entries:
swtch# show mpls switching traffic-eng lsp ipv4 vrf vrf1
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
switch#
This example shows how to display the traffic engineering LSP IPV4 ingress address:
switch# show mpls switching traffic-eng lsp ipv4 10.1.1.1 101
Legend:
(P)=Protected, (F)=FRR active, (*)=more labels in stack.
In-Label
18
switch#
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1306
show mpls switching traffic-eng lsp ipv4 {TE ingress address | detail vrf vrf name | vrf vrf name}
Traffic engineering (TE) ingress address.
Displays the detailed information.
Displays the virtual routing and forwarding (VRF) instance.
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Out-Label Tunnel
Midpoint
18 10.1.1.1/10.1.1.4/-101 Eth2/27
Out Next-Hop
Interface
27.28.0.2
Show Commands
P
OL-24994-01