Cisco Nexus 7000 Series Command Reference Manual page 434
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
vpn
vpn
To configure a virtual private network (VPN) ID on a Virtual Forwarding Interface (VFI) context, use the
vpn command.
Syntax Description
vpn-id
Defaults
None
Command Modes
config-l2vpn-vfi mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
6.2.2
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure a VPN ID on a VFI context:
switch# configure terminal
switch# configure terminal
switch(config)# l2vpn vfi context vpls80
switch(config-l2vpn-vfi)# description VFIforDualHome
switch(config-l2vpn-vfi)# vpn 10
switch(config-l2vpn-vfi)#
Related Commands
Command
bridge domain
l2vpn vfi context
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1230
vpn vpn-id
VPN ID. The range is from 1 to 4294967295.
Modification
This command was introduced.
Description
Enters bridge-domain configuration mode and configures a bridge domain.
Establishes a Layer 2 VPN (L2VPN) virtual forwarding interface (VFI)
between two or more separate networks.
V Commands
OL-24994-01
Advertisement
Table of Contents
