Cisco Nexus 7000 Series Command Reference Manual page 159

L Commands
logging events frr-protection primary active
To configure the generation of system logs when a protected primary LSP transitions to the FRR-active
state, use the logging events frr-protection primary active command. To stop logging these system
messages, use the no form of the command.
Syntax Description This command has no arguments or keywords.
Command Modes TE global configuration (config-te).
Supported User Roles network-admin
vdc-admin
Command History Release
7.3(0)D1(1)
Usage Guidelines No system message is logged if this feature is not configured.
Examples The following example shows how to configure FRR-active logging.
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# logging events frr-protection primary active
switch(config-te)#
OL-24994-01
logging events frr-protection primary active
no logging events frr-protection primary active
Modification
This command was introduced.
logging events frr-protection primary active
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1119