Cisco Nexus 7000 Series Command Reference Manual page 406

show route static vrf
show route static vrf
To display information about a static virtual routing and forwarding (VRF) route, use the show route
static vrf command.
Syntax Description vrf-name
Defaults
None
Command Modes
EXEC mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to display information about a static VRF route:
switch# show ipv6 route static vrf vpn1
IPv6 Routing Table for VRF "vrf1"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
switch#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1328
show {ipv4 | ipv6} route static vrf vrf-name
VRF name that is any case-sensitive, alphanumeric string up to 32
characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Show Commands
OL-24994-01