Cisco Nexus 7000 Series Command Reference Manual page 223

P Commands
password required
To configure a Label Distribution Protocol (LDP) password when establishing a session between LDP
peers, use the password required command. To return to the default setting, use the no form of this
command.
Syntax Description
for
prefix-list
Defaults None
Command Modes LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to configure an LDP password when establishing a session between LDP peers:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# password required for password1
switch(config-ldp)#
Related Commandss Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
password required [for prefix-list]
no password required
(Optional) Specifies a prefix list when establishing a session between a
peers.
(Optional) Prefix list for LDP peers.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
password required
1175