Cisco Nexus 7000 Series Command Reference Manual page 395
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show mpls traffic-eng lsp attributes
To display information about configured label switched path (LSP) attribute lists, use the show mpls
traffic-eng lsp attributes command.
Syntax Description
name
string
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
Use the show mpls traffic-eng lsp attributes command to view the LSP attribute lists configured on the
switch.
This command requires the MPLS Services license.
Examples
This example shows how to display information about configured LSP attribute lists:
switch# show mpls traffic-eng lsp attributes name test
LIST test
switch#
Related Commands
Command
lsp attribute
OL-24994-01
show mpls traffic-eng lsp attributes [name] [string]
(Optional) Attribute list name.
(Optional) Specifies the attribute list name. The range is from 1 to 63
alphanumeric characters.
Modification
This command was introduced.
bandwidth 100
protection fast-reroute
record-route
Description
Configures the label switched path (LSP) attribute information.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls traffic-eng lsp attributes
1317
Advertisement
Table of Contents
