Cisco Nexus 7000 Series Command Reference Manual page 343
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show ipv6 route static vrf
To display information about a static virtual routing and forwarding (VRF) route, use the show ipv6
route static vrf command.
Syntax Description
vrf-name
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display information about a static VRF route:
switch# show ipv6 route statistics vrf vrf1
IPv6 Routing Table for VRF "vrf1"
'*' denotes best ucast next-hop
'**' denotes best mcast next-hop
'[x/y]' denotes [preference/metric]
Could not resolve "statistics"
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show ipv6 route static vrf vrf-name
VRF name that is any case-sensitive, alphanumeric string up to 32
characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ipv6 route static vrf
1265
Advertisement
Table of Contents
