Cisco Nexus 7000 Series Command Reference Manual page 278

shutdown (TE configuration mode)
shutdown (TE configuration mode)
To shut down the Multiprotocol Label Switching (MPLS) traffic engineering (TE) sessions, use the
shutdown command. To return to the default settings, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes TE configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples The following example shows how to shutdown the Multiprotocol Label Switching (MPLS) traffic
engineering (TE) sessions:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# shutdown
switch(config-ldp)#
Related Commands Command
mpls traffic-eng
configuration
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1210
shutdown
no shutdown
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
S Commands
OL-24994-01