Cisco Nexus 7000 Series Command Reference Manual page 283
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
S Commands
signalling hello graceful-restart refresh misses
To configure the number of consecutive missed hello messages before a neighbor is declared down or
unreachable, use the signalling hello graceful-restart refresh misses command. To return to the default
settings, use the no form of this command.
Syntax Description
refresh-misses
Defaults
4
Command Modes
RSVP configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure the number of consecutive missed hello messages before a
neighbor is declared down or unreachable:
switch(config)# ip rsvp
switch(config-ip-rsvp)# signalling hello graceful-restart refresh misses 5
switch(config-ip-rsvp)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
signalling hello graceful-restart refresh misses refresh-misses
no signalling hello graceful-restart refresh misses refresh-misses
Number of missed hello messages. The range is from 4 to 10.
Modification
This command was introduced.
Description
Protocol (LDP).
signalling hello graceful-restart refresh misses
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1215
Advertisement
Table of Contents
