Cisco Nexus 7000 Series Command Reference Manual page 170

lsp attribute
lsp attribute
To configure an label switched path (LSP) attribute list, use the lsp attribute command.
Syntax Description
string
Defaults
None
Command Modes TE configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples This example shows how to configure an LSP attribute list:
switch# configure terminal
switch(config)# mpls traffic-eng configuration
switch(config-te)# lsp attribute 1
switch(config-lsp-attr)#
Related Commands Command
mpls traffic-eng
configuration
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1130
lsp attribute string
LSP attribute list that can be any case-sensitive, alphanumeric string up to
63 characters.
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
L Commands
OL-24994-01