M Commands
mpls ldp igp autoconfig
To enable the Multiprotocol Label Switching (MPLS) Label Distribution Protocol (LDP) for the
specified interface, use the mpls ldp igp autoconfig command. To return to the default setting, use the no
form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
Interface configuration mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to enable MPLS LDP for the specified interface:
switch# configure terminal
switch(config)# interface ethernet 7/1
switch(config-if)# mpls ldp igp autoconfig
switch(config-if)#
Related Commands
Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
mpls ldp igp autoconfig
no mpls ldp igp autoconfig
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
mpls ldp igp autoconfig
1153