Cisco Nexus 7000 Series Command Reference Manual page 222

password option
password option
To configure a Message Digest (MD5) password for Label Distribution Protocol (LDP) sessions with
neighbors whose LDP router IDs are permitted by a specified prefix list, use the password option
command. To return to the default setting, use the no form of this command.
Syntax Description
number
for
prefix-list
key-chain
keychain-name
Defaults None
Command Modes
LDP configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to configure an MD5 password for LDP sessions with neighbors whose LDP
router IDs are permitted by a specified prefix list:
switch# configure terminal
switch(config)# mpls ldp configuration
switch(config-ldp)# password option 1 for peer-prefix key-chain keychain1
switch(config-ldp)#
Related Commandss Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1174
password option number for prefix-list key-chain keychain-name
no password option number
Order in which the prefix lists is evaluated when the device determines a
neighbor password. The valid range is from 1 to 32767.
Specifies the prefix list control on LDP peers.
Prefix list for LDP peers.
Specifies a key chain name.
Key chain name.
Modification
This command was introduced.
Description
Protocol (LDP).
P Commands
OL-24994-01