Cisco Nexus 7000 Series Command Reference Manual page 194

mpls label range
mpls label range
To configure the Multiprotocol Label Switching (MPLS) label range for a static label assignment, use
the mpls label range command. To return to the default setting, use the no form of this command.
Syntax Description
min-value
max-value
static
min-static-value
max-static-value
Defaults
None
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(5) and higher
including 6.1(1)
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to reserve a range of labels for static label assignment:
switch# configure terminal
switch(config)# mpls label range 200 100000 static 16 199
switch(config)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1146
mpls label range min-value max-value [static min-static-value max-static-value]
no mpls label range min-value max-value [static min-static-value max-static-value]
Minumum label value. The range is from 16 to 471804.
Maximum label value. The range is from 16 to 471804.
(Optional) Specifies the block of labels for static bindings.
Minimum static label value. The range is from 16 to 471804.
Maximum static label value.The range is from 16 to 471804.
Modification
Changed the maximum label value from 492286 to 471804.
This command was introduced.
Description
Protocol (LDP).
M Commands
OL-24994-01