Cisco Nexus 7000 Series Command Reference Manual page 320
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
show ip rsvp
show ip rsvp
To display the global Resource Reservation Protocol (RSVP) information, use the show ip rsvp
command.
Syntax Description
This command has no arguments or keywords.
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display the global RSVP information:
switch# show ip rsvp
RSVP Process
Registered RSVP Clients
Message Bundling
Refresh Parameters
Refresh-Reduction
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
1242
show ip rsvp
Modification
This command was introduced.
Supervisor State: Active
Start Type: configuration [stateless]
High Availability: Enabled [ok]
Graceful Restart: enabled
Hello State Timeout: disabled
Router id: 0.0.0.0
Patherr State Removal: Disabled
Local Epoch: 0x74b530
MPLS-TE [Service-Access-Point 288, ID 1, Batch-Time 50 msec]
Disabled [Transmit-delay 50 msec, Max-Size 4096 bytes]
Interval 45 sec, Miss-Limit 4
Disabled [Initial-Retransmit-Delay 5000 msec]
[Rapid-Retransmit Enabled, Ack-Delay 400 msec]
Show Commands
OL-24994-01
Advertisement
Table of Contents
