Cisco Nexus 7000 Series Command Reference Manual page 371

Show Commands
show mpls static binding ipv4 vrf
To display the configured Multiprotocol Label Switching (MPLS) static virtual routing and forwarding
(VRF) binding for IPv4, use the show mpls static binding ipv4 vrf command.
Syntax Description vrf-name
Defaults
None
Command Modes Interface configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines
You must configure the MPLS VPN and VRFs before creating VRF-aware static labels.
This command requires the MPLS Services license.
Examples This example shows how to display the MPLS VRF static bindings for IPv4:
switch# config t
Enter configuration commands, one per line.
switch(config-ldp)# show mpls static binding ipv4 vrf vrf100----need to get the output
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
show mpls static binding ipv4 vrf vrf-name
VRF name. The maximum size is 32 alphanumeric characters.
Modification
This command was introduced.
Description
Protocol (LDP).
End with CNTL/Z.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show mpls static binding ipv4 vrf
1293