Cisco Nexus 7000 Series Command Reference Manual page 435

V Commands
vrf
To display information for a virtual routing and forwarding (VRF) instance, use the vrf command
to the default setting, use the no form of this command.
Syntax Description
vrf-name
Defaults
None
Command Modes Router VRF configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to display information about each VRF instance:
switch# configure t
switch(config)# feature ospf
switch(config)# Test1
switch(config-router)# timers throttle lsa 0 5000 5000
switch(config-router)# timers lsa-arrival 30
switch(config-router)# vrf vpn1
switch(config-router-vrf)#
Related Commands Command
mpls ldp configuration Configures the Multiprotocol Label Switching (MPLS) Label Distribution
OL-24994-01
vrf vrf-name
no vrf vrf-name
VRF name that is any case-sensitive alphanumeric string up to 32
characters.
Modification
This command was introduced.
Description
Protocol (LDP).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
vrf
.
To return
1231