Cisco Nexus 7000 Series Command Reference Manual page 253

R Commands
reoptimize events link-up
To reoptimize tunnels on link-up events, use the reoptimize events link-up command
default setting, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults None
Command Modes TE configuration mode
Supported User Roles network-admin
vdc-admin
Command History Release
5.2(1)
Usage Guidelines This command requires the MPLS Services license.
Examples This example shows how to reoptimize tunnels on link-up events:
switch# configure t
switch(config)# mpls traffic-eng configuration
switch(config-te)# reoptimize events link-up
switch(config-te)#
Related Commands Command
mpls traffic-eng
configuration
OL-24994-01
reoptimize events link-up
no reoptimize events link-up
Modification
This command was introduced.
Description
Configures the Multiprotocol Label Switching (MPLS) Traffic Engineering
Protocol (MPLS-TE).
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
reoptimize events link-up
.
To return to the
1205